Keep the grade number explicit
The listed titanium grades are separate material designations. Provide the full specification instead of describing the requirement simply as titanium.
Define the grade.
Refine the requirement.
Titanium fitting enquiries begin with the exact grade and product specification. Include the required dimensions, manufacturing conditions and project documentation for technical review.
GRADE OVERVIEW
Start with the complete designation
The grade references below help structure an enquiry. They are not a statement of stock, equivalence or suitability for a particular service.
| Grade / detail | What to specify |
|---|---|
| Grade 2 | Specify the complete product standard and grade designation. |
| Grade 5 | Confirm that this grade is required for the requested fitting form. |
| Grade 7 | Include the exact material designation and acceptance requirements. |
| Grade 12 | State any additional project conditions with the grade reference. |
Reference note: TIMET grade reference. Use the project’s approved specification for selection.
SPECIFICATION DETAILS
Make the material requirement clear
Keep material identity and acceptance criteria together.
Confirm the fitting requirement
Grade availability depends on the product form, dimensions and manufacturing route. Request confirmation for your particular fitting.
FITTING FAMILIES
Choose the geometry for your connection
Material availability is confirmed against the selected fitting, dimensions and project requirements.
Elbows
Direction changes and radius configurations.
Explore fitting →Tees
Equal and reducing branch connections.
Explore fitting →Reducers
Concentric and eccentric diameter changes.
Explore fitting →Caps
Welded closures for pipe ends.
Explore fitting →Stub Ends
Neck and lap details for flange connections.
Explore fitting →Special Fittings
Drawing-specific geometries and requirements.
Explore fitting →ENQUIRY CHECKLIST
Prepare a complete material enquiry
Include the information needed to review your titanium alloys requirement.
- Material designation
Exact grade, product specification, edition and any approved alternatives.
- Fitting configuration
Product type, sizes, wall thicknesses and applicable dimensional standard.
- Project conditions
Relevant service information and the approved material specification.
- Supply & inspection
Manufacturing condition, tests, certificates and marking requirements.
- Quantity & destination
Item quantities, required date and delivery location.
- Drawing references
Drawing numbers, revisions and any project-specific notes.
COMMON QUESTIONS
Before you specify titanium alloys
Can I use any titanium grade for a fitting?
No. Specify the grade approved for the project and confirm availability for the product form, dimensions and required supply condition.
Does this page confirm stock or delivery time?
No. Availability and delivery depend on the exact fitting, grade, dimensions, quantity and documentation requirements. These must be confirmed in the quotation.
Which fitting sizes are available in this material?
Send the required fitting type, end sizes and wall thicknesses. Availability is reviewed for that combination; a material family does not define a universal size range.
What certificates should I request?
Specify the certificate type, material traceability, inspection and testing required by the project. Include supplementary requirements with the initial enquiry.
BUILD YOUR ENQUIRY
Have a titanium alloys requirement?
Prepare the exact grade, fitting dimensions and project specification for review.
Prepare your enquiry →